home *** CD-ROM | disk | FTP | other *** search
- FIRST TIME USERS OF INTEXT
-
- The Intext Multilingual Wordprocessor can be started in one of two ways
- depending on the type of graphic display card and monitor you are using
- with your personal computer (PC):
- ╔══════════════════════════════════╤═════════════════════════════════╗
- ║ TYPE I │ TYPE II ║
- ╟──────────────────────────────────┼─────────────────────────────────╢
- ║ If your PC uses a Color Graphic │ If your PC uses a clone adapter ║
- ║ Adapter (CGA) or a Hercules │ that emulates Hercules Graphics ║
- ║ Graphic Adapter (HGA), enter │ but a monitor that can NOT ║
- ║ the following at the prompt: │ display it, enter: ║
- ║ INTEXT │ INTEXT /C ║
- ╚══════════════════════════════════╧═════════════════════════════════╝
- NOTE: If you make the wrong choice, the program runs but nothing will be
- ----- displayed on the screen. If that happens, just press the Esc key,
- and when the prompt appears on the screen, enter: INTEXT /C
-
- This information screen will not appear again unless you start the
- program by typing: INTEXT /I
-
- Before Epson LQ 24-pin users start Intext, they should enter: 24PIN
-